Jotun Resist 86

Deskripsi

Jotun Resist 86 This is a two component moisture curing inorganic zinc ethyl silicate coating. It is a fast curing, very high zinc dust containing product. It conforms to the compositional requirements of SSPC paint 20, level 1, ISO 12944-5 and AS/NZS 3750.15 1994. It provides excellent corrosion protection as a single coat or as part of a complete coating system. It is heat resistant up to 540 °C (1004 °F). To be used as primer in a coating system and as single coat system in atmospheric environments. Suitable for properly prepared carbon steel substrates only. This product complies with ASTM D520 type II zinc dust.

Typical use
Protective:
Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO 12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially designed as a primer for coating systems where extended durability is required.

Approvals and certificates
Pre-qualified in accordance with NORSOK M-501 in selected systems Suitable for use in mating surfaces of High Strength Friction Grip Bolted Connections:
Complies with the requirements of Research Council on Structural Connections (RCSC) Class B, Appendix A (Slip coefficient and resistance to tension creep).
Additional certificates and approvals may be available on request.

Colours
Greenish Grey, Grey

Pre-qualified in accordance with NORSOK M-501 in selected systems.
Suitable for use in mating surfaces of High Strength Friction Grip Bolted Connections:
Complies with the requirements of Research Council on Structural Connections (RCSC) Class B, Appendix A (Slip coefficient and resistance to tension creep).